Fox Dpx2 Psi Chart Rider Weight

Fox Dpx2 Psi Chart Rider Weight – 150mm fox 36, grip2 psi: 220 psi, 7 clicks of rebound, and 6 clicks of compression. Setting up the shock i followed fox’s recommendation and started with my body weight in air pressure. According to fox, this reduces the average air pressure required to support the rider by about 40 psi.

That air is not coming from the shock, it's. Suspension setup guide for your pivot suspension equipped bike to pedal and descend at its best, it is important to tune the suspension properly. Santa cruz 5010 v3 fork: I run one of my dpx2's with 335 psi and a 0.6 volume spacer, and one with 335 psi and a 0.8 volume spacer.

Up to 50% off at specialized.com. Alternatively, you can use 55% for xcountry, 65% for freeride, and 70% for downhill. I'm running the dpx2 on a trek slash 29, and for my 160lb weight my current settings are as follows:

I did find that i needed to add more air in order to get the proper amount of sag. With the air pump attached to the shock valve, slowly cycle your shock through 25% of its travel 10 times as you reach your desired. I spent a fair amount of time setting the shock up according to the fox specs.

So i have been experimenting with different. 8 rows rider’s weight (kg) air pressure (psi) lsc rebound ; Sag setting to achieve the best performance from your fox suspension, adjust the air pressure to attain your proper sag setting.

Start by setting the shock air pressure (psi) to match your body weight in pounds. I’m about 220lbs with gear and i need. Sag is the amount your suspension.

Fox Float Dps Evol Air Pressure Weight Chart